- Home
- ยป
- Product Range
- »
- Intelligent PID Controller
Intelligent PID Controller
Intelligent PID Controller
Control Type | PID/On-Off |
Size | 48 x 96 mm |
Frequency | 50/60 Hz |
Voltage | 24 VAC/DC |
Control output Type | Relay/SSR |
Input Type | Current (mA) |
Weight | 0.25 kg |
Country of Origin | Made in India |
LU-906M is widely used for automatically control systems of temperature, flow, pressure, liquid level etc. which are in industries of chemical, ceramics, light industry, metallurgy, petrochemical, heat treatment etc.,
Main technical parameters:
· Input accuracy: ±(0.2%F.S+1) digit
· Resolution: 1, 0.1
· Display: Double Four-bit LED Numerical Code Tube
and light pillar.
· Input type: K, S, B, T, E, J, Wre325, N
Pt100, Cu50, Cu100
0-10mA, 4-20mA
0-5V, 1-5V
Special input: R, Wre526, mV, other
(indicted when ordering)
· Output module type:
J1: relay output (resistance 250VAC/3A open + hold)
J2: relay output (resistance 250VAC/0.8A open)
T: SSR trigger output (12V/40mA)
T1: single-circuit silicon-controlled zero-crossing trigger
T2: two-circuits silicon-controlled zero-crossing trigger
I1: control current output (0-10mA/4-20mA)
I2: current transform output (0-10mA/4-20mA)
V1: DC12V/50mA sensor power supply
V2: DC24V/50mA sensor power supply
V3: DC5V/50mA sensor power supply
V5: voltage transform output (0-5V or 1-5V or 0-10V)
R: RS232 communication
S: RS485 communication
C1: single-phase silicon-controlled phase-shift trigger
C3: 3-phase 3-wire silicon-controlled phase-shift trigger
C4: 3-phase 4-wire silicon-controlled phase-shift trigger
· T.C cold-junction compensation errors: ±1
· T.C break or over range: display Sb
· Sampling rate: 0.5 second
· Power voltage: 85-264VAC
· Power consumption: 4W
Additional Information:
- Item Code: LU-906M
Intelligent PID Position Proportion Controller
Certifications | CE |
Control Type | High Limit, Low Limit |
Application | Temperature |
Additional Information:
- Item Code: LU-907M
Intelligent Program PID Controller
Control Type | PID/On-Off |
Size | 48 x 48 mm |
Frequency | 50/60 Hz |
Voltage | 24 VAC/DC |
Mounting Type | Panel |
Accuracy | 0.1 % |
Country of Origin | Made in India |
LU-960M/K may have 5 to 200 segments program control curves, it is suitable for temperature rise/fall program control systems in which high precession multi-segments curve control is needed.
LU-960M has the function of on/off control, manual/automatic non-perturbation cut and auto-tuning.
LU-960K is based on LU-906M, but it has not function of manual/automatic non-perturbation cut, and pillar light display.
Main technical parameters
Input accuracy: ±(0.2%F.S+1) digit
Resolution: 1, 0.1
Display: Double Four-bit LED Numerical Code Tube
and light pillar (for 960M only)
Input type: K, S, B, T, E, J, Wre325, N
Pt100, Cu50, Cu100
0-10mA, 4-20mA
0-5V, 1-5V
Special input: R, Wre526, mV, other
(indicted when ordering)
Output module type:
J1: relay output (resistance 250VAC/3A open + hold)
J2: relay output (resistance 250VAC/0.8A open)
T: SSR trigger output (12V/40mA)
T1: single-circuit silicon-controlled zero-crossing trigger
T2: two-circuit silicon-controlled zero-crossing trigger
I1: control current output (0-10mA/4-20mA)
I2: current transform output (0-10mA/4-20mA)
V1: DC12V/50mA sensor power supply
V2: DC24V/50mA sensor power supply
V3: DC5V/50mA sensor power supply
V5: control/transform voltage output (0-5V or 1-5V or 0-10V)
R: RS232 communication
S: RS485 communication
C1: single-phase silicon-controlled phase-shift trigger
C3: 3-phase 3-wire silicon-controlled phase-shift trigger
C4: 3-phase 4-wire silicon-controlled phase-shift trigger
5-200 segments control curve.
T.C cold-junction compensation errors: ±1
T.C break or over range: display Sb
Sampling rate: 0.5 second
Power voltage: 85-264VAC,
Power consumption: 4W
Program segments
A: 5 B: 10 0: 20 1: 40
2: 60 3: 80 4: 100 5: 120
6: 140 7: 160 8: 180 9: 200.
Additional Information:
- Item Code: LU-960M
Multi- Loop Controller
Control Type | On-Off |
Size | 96 x 48 mm |
Control output Type | Analog (mA/mV) |
Input Type | Current (mA) |
Country of Origin | Made in India |
LU-905MF may shield survey and display of any one or some input channels; it has two display methods: 1) automatically tour-display the PV of each channel 2) fix display PV of only one channel. The display interval can be regulated when automatically tour-display the PV. LU-905MF can have 16 channels transform output and sensor power supply.
2. Main technical parameters
• Input accuracy: ±(0.2%F.S+1) digit
• Resolution: 1, 0.1
• Display: Double Four-bit LED Numerical Code Tube
• Input type:K, S, B, T, E, J, Wre325, N, R; Pt100, Cu50, Cu100, 30-350ohm 0-10mA, 4-20mA, 0-5V, 1-5V
• Output module type:
Switch signal output: relay (AC220V/3A, DC24V/5A)
Transform output (4-20mA)
C: Sensor power supply: 24V/50mA
R: RS232 communication
S: RS485 communication
• T.C cold-junction compensation errors: ±1deg
• T.C break or over range: display Sb
• Sampling rate: 0.5 second/channel
• Power voltage: 85-264VAC
• Power consumption: 4W
Additional Information:
- Item Code: LU-905F
Programmable PID Controller
Control Type | PID |
Size | 48 x 48 mm |
Frequency | 50/60 Hz |
Voltage | 24 VAC/DC |
Input Type | Universal |
Country of Origin | Made in India |
LU-960M/K may have 5 to 200 segments program control curves, it is suitable for temperature rise/fall program control systems in which high precession multi- segments curve control is needed.
LU-960M has the function of on/off control, manual/automatic non-perturbation cut and auto-tuning.
LU-960K is based on LU-906M, but it has not function of manual/automatic non-perturbation cut, and pillar light display.
Main technical parameters
Input accuracy: ±(0.2%F.S+1) digit
Resolution: 1, 0.1
Display: Double Four-bit LED Numerical Code Tube
and light pillar (for 960M only)
Input type: K, S, B, T, E, J, Wre325, N
Pt100, Cu50, Cu100
0-10mA, 4-20mA
0-5V, 1-5V
Special input: R, Wre526, mV, other
(indicted when ordering)
Output module type:
J1: relay output (resistance 250VAC/3A open + hold)
J2: relay output (resistance 250VAC/0.8A open)
T: SSR trigger output (12V/40mA)
T1: single-circuit silicon-controlled zero-crossing trigger
T2: two-circuit silicon-controlled zero-crossing trigger
I1: control current output (0-10mA/4-20mA)
I2: current transform output (0-10mA/4-20mA)
V1: DC12V/50mA sensor power supply
V2: DC24V/50mA sensor power supply
V3: DC5V/50mA sensor power supply
V5: control/transform voltage output (0-5V or 1-5V or 0-10V)
R: RS232 communication
S: RS485 communication
C1: single-phase silicon-controlled phase-shift trigger
C3: 3-phase 3-wire silicon-controlled phase-shift trigger
C4: 3-phase 4-wire silicon-controlled phase-shift trigger
5-200 segments control curve.
T.C cold-junction compensation errors: ±1
T.C break or over range: display Sb
Sampling rate: 0.5 second
Power voltage: 85-264VAC,
Power consumption: 4W
Program segments
A: 5 B: 10 0: 20 1: 40
2: 60 3: 80 4: 100 5: 120
6: 140 7: 160 8: 180 9: 200.
Additional Information:
- Item Code: LU-960K
Manual-Operation Controller
Control Type | On-Off |
Size | 96 x 96 mm |
Frequency | 50/60 Hz |
Voltage | 24 VAC/DC |
Display Type | 4 Digit/7 Segment |
Accuracy | 0.1 % |
Country of Origin | Made in India |
Additional Information:
- Item Code: LU-908M